Bucket Elevators are used to elevate loose bulk materials through the use of moving buckets attached to chain or belt, vertically through an enclosed casing. The complete unit consists of following items.
It consists of three parts. One is body with material outlet than a` channel frame. Third is cover. Channel section provides seating for drive pulley with pedestal, drive unit (motor, pulley, belt) and tie rod for proper tensioning of belt/chain.
This is basically a hollow casing of standard height. It is used in number as required for a particular height.
This section is consists of casing with material inlet & scooping plate, tensioning device consisting of boot pulley with shaft & bearing housed in casing which is guided in frame work by square guide bar and adjusted by a square threaded screw for proper tensioning of belt/chain. It has inspecting window for check up of material entry & flow.
These are fixed/attached to conveying element at a distance depending upon capacity. These buckets scoops the material and carries it up by the movement of conveying element and then discharging the material centrifugally through material outlet provided in the top section.
This can be chain or belt as per requirement. They are made endless i.e. both the ends are joined & vulcanized in case of belt & pinned in case of chain.
Get in Touch
If you’ve got questions or ideas you would like to share, send a message. For anything more specific, please use one of the addresses listed below.
B S ENGINEERING, SARNA, MURADNAGAR, Ghaziabad,Uttar Pradesh, 201206
Find Us on Map
Let's Talk About Your Project
After we get some information from you, we’ll set up a time to discuss your project in further detail.